Smart homes are getting more and more attention.Among them,smart toilets are becoming more and more popular. With the increase in the number of people, the problems encountered in use will also increase. Let's take a look at common failures of smart toilets, such as The ring is not heated, what should I do in this situation?
The sanitary ware toilet seat does not heat, you need to check the remote control and the heating wire of the seat and the temperature sensor, and then use the remote control to set the temperature for testing. If there is no heating, check the resistance of the two ends of the heating wire of the seat.
Sensor If there is no problem with the temperature sensor, you need to replace the seat ring and check whether it works normally. In addition, there is another common failure of the smart toilet is that the air temperature is not hot. This phenomenon requires checking the drying device and computer board to measure the drying. Whether the resistance at both ends of the heating wire is within the normal range, and the voltage at both ends of the plugged in power supply must also be maintained at 220V. If these are normal,the computer board is malfunctioning
When multiple appliances are used for a long time at the same time, it will cause an overload condition, which will cause the heating wire to burn out and the computer board to be damaged. It is necessary to replace the computer board with a new one. After the replacement is completed, check whether it is normal.
The above are the two common failure phenomena of a sanitary ware toilet seat. Keep abreast of some smart electrical appliance repair methods at any time, in case of a tight situation, you can find a solution in time.
