The smart toilet has been used for a long time, how to do deep cleaning?

When purchasing toilets, more and more people will choose smart toilets, which represent a healthier lifestyle. It has many special functions such as buttock cleaning, warm air drying, automatic deodorization, etc., which make our bathroom life more comfortable and healthy.

However, the smart toilet needs to be deep cleaned after being used for a long time, otherwise, it will breed bacteria and affect your health.

Not cleaning your toilet bowl on a regular basis can have several negative consequences. Firstly, it can lead to the buildup of bacteria and germs, which can cause diseases and infections. Secondly, over time, stains and discoloration can occur, making your toilet appear unsightly and unclean. Additionally, if left uncleaned for too long, odors can develop, making your bathroom an unpleasant place to be.

Furthermore, not cleaning your toilet bowl can also lead to clogging and blockages, which can be both frustrating and expensive to fix. This can happen when waste and debris accumulate in the pipes and prevent water from flowing freely.

In summary, neglecting to clean your toilet bowl regularly can result in health hazards, unsightly appearance, unpleasant odors, and potential plumbing problems. Therefore, it is important to make cleaning your toilet bowl a regular part of your household cleaning routine.

How to clean the smart toilet Come and learn!

01 Toilet/toilet cover cleaning

The smart toilet is an electrical appliance and cannot be flushed directly with water. Be sure to unplug it before cleaning.

First, use a soft cloth dampened with water, add some detergent, wipe the toilet ring and the toilet cover, and finally wipe it again with a soft cloth that has only been soaked in clean water.

Do not use decontamination powder, abrasive powder, detergents containing coarse powder, strong acid, and alkali, and tools such as nylon brushes, otherwise, they will damage the surface of the toilet seat.

02 Filter replacement

When using a smart toilet, the cleaning water needs to be in close contact with our bodies, and the water quality must be clean and free of contamination.

Therefore, it is very important to replace the toilet filter element regularly, which can not only ensure the water purification effect but also reduce the residual impurities intercepted by each filter element and prolong the service life of the product.

NAVISANI  smart toilet filter element can effectively filter impurities such as sediment, rust, floating algae, suspended solids, etc., help purify water quality and make the water cleaner.

Under normal circumstances, according to the water quality and water consumption, the general life cycle of a single-stage filter element is 4-6 months, and it is recommended to replace it once every six months. The service life of the dual-stage filter element is 18-24 months, and it is recommended to replace it every 2 years.

03Nozzle cleaning

According to the requirements of the manual, in the case of leaving the seat, operate

The "nozzle self-cleaning" function button on the remote control or handle, the nozzle is self-cleaning and then extended, and the necessary manual cleaning is performed.

1. Removing the nozzle: After the nozzle is extended and fixed, it is recommended to fix the nozzle rod with one hand, and pull out the nozzle head with the other hand along the direction of the nozzle.

2. Use a toothbrush, sponge, or smooth cloth with soapy water or neutral detergent to scrub the nozzle and nozzle, and then rinse with clean water after wiping. Be careful not to dry wipe, and do not use sandpaper or rough cloth to wipe, be sure to stain with lotion, otherwise, it will damage the nozzle.

3. After the cleaning is completed, it is recommended to fix the nozzle rod with one hand, and gently re-install the nozzle on the flushing rod. Pay attention to the installation in place to prevent the nozzle head from falling out and being lost.

4. Operate the "stop" function button on the handle or remote control, or after 120 seconds, the nozzle retracts and the cleaning mode is stopped (during the cleaning process, the cleaning mode will be stopped when it touches the seat sensing point).

The nozzle of NAVISANI  smart toilet adopts silver ion antibacterial technology. When the nozzle is self-cleaning, the nozzle can be disassembled and cleaned. Regular cleaning of the nozzle can drain the stale water in the pipe, say goodbye to dirt, and make cleaning healthier.

If you have more questions about smart toilets, you can contact us for professional answers!