Introduction: As an emerging technology product, the smart toilet cover has a powerful function that brings people a better toilet experience, and at the same time makes everyone's life more hygienic and comfortable. However, because of this, when the smart toilet cover at home has a problem and needs to be repaired, as ordinary people, we can only sigh, "We have more than our heart but lack of energy." In fact, it is not. Although most of the repairs of smart toilet lids require professionals, the editor believes that for some common and simple smart toilet lid repairs, we can solve or troubleshoot the problems through the following methods. Let's take a look.
1. Maintenance method of smart toilet lid
1. Water spray problem
a. If the status indicator of your smart toilet will be on when you use it, but it just doesn’t work. In this case, you can use the remote control to press again to automatically release the water. If this is not the problem, check whether the water release motor and Hall plate are available. If it is broken, you can contact the manufacturer to replace it, or ask a worker to come home to repair it.
b. If the toilet cover in your house does not spray water, first check whether the water pipe is broken. If the water pipe is not broken, then check whether there is water. If the water pipe is defective, it is best to take it to the local repair point for repair.
2. Drying problem
If the cleaning and lighting are normal, you can use a multimeter to measure the voltage of the sensor when the drying is not working. If the voltage exceeds 5 V, the sensor is broken and a seat ring needs to be replaced.
3. Deodorization problem
To check why the toilet is not deodorized, you can use the elimination method. First, measure whether the voltage of the deodorizing fan is 12V. If there is no 12V, it means that the fan is broken. Just replace the fan. If it is 12V or above, there is a problem with the computer board.
4. Key failure
If the smart toilet is used for a long time, the buttons may fail. At this time, the microprocessor may be malfunctioning, and you only need to replace it with a new motherboard.
5. The water temperature is super high
First of all, you can first put the drain bolt to see if the water temperature will exceed 45 degrees. If it exceeds 45 degrees, it means that the temperature-sensitive switch is broken. If you do not want to drain all the water in the water tank and refill it, then use the remote control to turn off the heating function, and use a multimeter to measure whether there is voltage on the plug. If there is voltage, the computer board is broken and the computer board needs to be replaced.
6. The seat ring is not heated
If the seat ring is not heated, first disconnect the heating wire of the seat ring, and then measure its resistance value. If the resistance value at both ends is normal, check whether the plug-in contact is good, or if you have a new seat ring at home, you can try it. Try, if it still doesn't heat, then there is a problem with the computer version.
2. Suggestions for daily maintenance of smart toilet lid
First of all, when performing daily cleaning and maintenance of the smart toilet lid, be sure to unplug the power switch to ensure that the power indicator lights of the smart toilet lid are all off.
The upper body and lower body can be cleaned separately. As long as the upper body is gently lifted, it can be easily removed and separated from the water source and power source. Then, the seat ring and the seat cover can be separated according to the correct method for thorough cleaning.
The smart toilet lid cannot be washed directly with water. You can choose to wipe the product with a damp soft cloth. When the surface is dirty, drip a small amount of diluted neutral detergent. It is worth noting that do not use detergents that contain coarse-grained powders, strong acid and alkali, and nylon brushes that are easy to scratch the surface.
