The toilet seat is an important part of the whole toilet. It plays a very important role in the comfortable use of the toilet. Because it also has a long life, we have to face the problem: what should the toilet seat be broken? Maybe you will choose to replace it, or repair it. In any case, it is best to pay attention to the maintenance during use. This is not only for family health. It is also an important way to ensure its longevity.
1. If the toilet seat is broken, replace it.
If the toilet seat is broken and worse, you have to prepare two money: one for replacing the new toilet lid and the other for the cost of installing the worker. Of course, if you can change it yourself, you can do it yourself, and you only need to spend money on the toilet lid.
2. Toilet seat replacement method
Method 1: Use a spanner wrench to remove the screw cap and replace it with a new one. Usually the position of the screw cap is not easy to find, either in the bright place or in the dark. If it is in the dark, it is usually in the toilet seat on the side of the tank. You need to open the cover and reach in. Go to the top and the position of the water tank. If there is no accident, you can touch it.
Method 2: Only need to remove and replace the fixing bolts at the back of the toilet. It is necessary to operate in the opposite direction during installation. In most cases, the toilet lid is not sized, just adjust both bolts during installation. But don't forget to measure the size: the distance between the screw holes, the width and length of the toilet lid, and replace it when you buy a new toilet lid.
Method 3: From the purpose of saving money, it is not necessarily that all toilet seats have problems to be replaced, and some are only partially damaged, and some repairs can be made without serious repair.
3. Toilet seat cleaning and maintenance
1) Do not allow the toilet seat to come into direct contact with abrasive chemicals and cosmetics as these chemicals can damage the surface of the seat.
2) Do not place hard objects or heavy objects, such as water tank caps, flower pots, buckets, pots, etc., on top to avoid surface scratching or cracking.
3) It is recommended to clean the toilet seat with a soft cloth. Do not use strong acid, strong carbon fire decontamination powder, or volatile agents, thinners or other chemicals to clean, otherwise the surface will be corroded. In addition, it is not possible to clean it with sharp tools such as wire brushes or blades.
4) When the toilet seat cover is used, it should be lightly opened. Do not directly collide with the water tank to avoid leaving the stain to affect the appearance or break it.
What should I do if the toilet seat is broken? Don't just think about replacing it, but also analyze the cause of the damage. If the maintenance work is done during the use, the service life may be longer.
