What are the similarities and differences between smart toilet and smart toilet cover?

Nov 12, 2020 Leave a message

When it comes to smart toilet and smart toilet cover, they seem to be two brothers, similar but different. As for the smart toilet lid, it seems that when I was a child, I watched the robots in "King Kong": I will form the head and I will form the torso; the smart toilet seems to be a complete body when it comes out, and both seem to be the same , In fact, they are different things. So what exactly are the same between them, the following are the common parameters between them:

 

Heat storage / instant heat:

Instant heating:

 

It is directly connected to tap water, and the tap water is heated by ceramics from the water inlet, and it is already hot water at the water outlet.


Heat storage type:

 

That is, there is a small water tank inside, and the tap water flows into the water tank to heat repeatedly. This kind of cost will be much lower than the above instant heat type, so the price is lower, but this kind of bacteria is easy to breed, and the washing and protection mode is not recommended.

 

Regardless of whether it is a heat storage type or an instant heat type, it is different from the traditional water tank toilet. Originally, only a water outlet is directly connected to the toilet, and a water diversion valve is required. The manufacturer generally calls it a filter/filter device.

 

Many manufacturers are now equipped with many equipment. After all, the rust in the pipes and the hard water in some areas will form a ditch at the water inlet of the smart toilet/smart toilet lid over time, causing water blockage.

 

It is precisely because of this that for some areas with low water pressure, it is recommended to buy a smart toilet when purchasing, because many smart toilets are equipped with low water pressure boosters.

 

Toilet seat

The toilet ring has a heating function, and most of them are around 3-4 gears.

 

However, in this common family, where everyone has a different toilet seat in winter, the heating function of the smart toilet is a bit tasteless, so turn it off when it is not needed.

 

Consider this disposable cushion paper

Ergonomics:

Many manufacturers also design some curvatures for toilet rings that fit the curve of the human body, but this kind of curvature is generally more suitable for adults. There are also some baffles specially added for children, but there are not many on the market.

 

Sprinkler

Stainless steel nozzle:

Resin nozzle:

There is also a detachable stainless steel + resin nozzle

Generally speaking, stainless steel nozzles are not easy to be blocked and wear-resistant. However, the third type will be an exception because it is detachable, but it will be more troublesome.

 

Care mode

Everyone's washing and care modes are basically the same. There are also gentle modes for adjusting water pressure, cleansing spray and so on.

Many manufacturers have a self-cleaning mode for nozzles,this can delay the clogging of dirt and dirt.

 

Warm air drying

Generally speaking, the warm air of different gears is almost dry even if it does not dry.

 

Deodorant

Most smart toilets don’t have the same functions as most smart toilets. Generally this function is combined with spray cleaning.

 

Sterilization

Some common manufacturers will promote antibacterial toilet ring

 

Some manufacturers will start with the night light

UV sterilization using ultraviolet rays, it is hard to say how many bacteria can be removed, but it is better than nothing.

 

Human body induction

Smart toilet lids are generally seat sensors and automatic lifting lids. The smart toilet has more tricks, kick sensing, radar sensing.

 

Soft night light

It is also mentioned above that some manufacturers with anti-bacterial effects will make a fuss on the night light, not only can illuminate the direction of travel at night, but also sterilize by UV.

 

remote control

In fact, the remote control is more friendly to some old people or some short-sighted friends.

 

socket

Thousands of examples tell us that it is important to leave a socket on the side of the toilet.

 

Different parameters of smart toilet & smart toilet cover

installation:

 

The smart toilet lid comes out at the bottom of the lid with just one click, making it easy to disassemble and assemble

 

The disassembly and assembly of the smart toilet is relatively troublesome.

Wifi/APP

 

In fact, we also mentioned above that there is an APP connected to the smart toilet lid.

 

It was later discovered that in actual use, the function of the smart toilet lid app has largely replaced the remote control function mentioned above.

 

This point is not very visible on the smart toilet, which focuses on near-field interaction.

 

In fact, when you get here, some people might say that this Huida brand does not know where it comes from. Is it inappropriate to give an example like this?

 

Jijinda has always been one of the top ten sanitary ware brands in China. In the early years, it was offline, but later moved to online. In the study I mentioned above, Huida is in the top sales.

 

Glazed

Regarding the issue of glazed surface, the smart toilet lid is not related, it is related to the smart toilet.

 

There are two common glazed surfaces:

Ordinary glazed surface:

There is no special treatment on the surface, but the common enamel is attached to the ceramic surface.

Yijie Glazed Surface/Nano Glazed Surface/Gaojie Glazed

 

Surface:

The classification is the same, the ceramic surface is increased by special enamel, usually two to three layers, so that the ceramic is not easy to stick to the dirt.

Easy clean glaze is used

 

Pit distance:

Generally speaking, it is only a question that needs to be considered when purchasing a smart toilet.

 

Is the distance from the wall to the center of the drainage pipe

 

It is also common between 300-500mm, with a segment every 50mm

 

It is best to measure it first or consult the store when

purchasing

Flushing method

Only the smart toilet all-in-one machine is available. The common flushing method is the same as the traditional toilet. There are two types:

 

Direct:

The compressed air is used to generate powerful thrust to flush dirt to the pipe.

 

Siphon type:

Utilize the height difference of the liquid to make the water column generate atmospheric pressure in the "S"-shaped bend, thereby flushing the water column and the dirt into the duct

 

Common smart toilets are generally siphonic, and you have basically never seen a direct flush

 

Automatic wall moistening:

Only the smart toilet has a choice, no matter whether it is a siphon or a direct flush, the upper part of the smart toilet cannot be flushed.

Through the unique design of the inner wall, a water outlet is added to clean the toilet twice before or after use.