The toilet seat is an important part of the toilet, but it may be damaged if it is used for a long time. At this time, the toilet seat needs to be replaced. In fact, the toilet seat is still relatively easy to replace. As long as you follow the steps, it will definitely work. Let's take a look at how to replace the toilet seat and the size of the toilet seat with Wuhan Decoration Network.
How to replace the toilet seat when it is broken
1. The toilet seat, as its name implies, is a circle for people to sit in the toilet. It is the contact surface that bears the weight of the human body, and the toilet seat will crack if it is subjected to the pressing force for a long time. In addition, the reason why the toilet seat of the sitting toilet is broken may be due to our bad living habits. The household maintenance cleaners that we may use when cleaning the seat are strongly corrosive and cause chemical structure damage to the seat; and usually when we use the toilet seat, the strength of the hand is not well controlled, causing it to directly collide with the water tank or the lower end of the toilet, causing it to break or break
2. Sometimes the damage of the toilet seat is not large, and it is not the main place of bearing capacity. From the perspective of saving money, there is no need to replace the toilet seat. We can do some repairs appropriately. If the edge of the toilet seat is a little cracked, we can use glue to repair-down. After repairing, you can put a cotton shell on the seat. If you do this, there will be no difference. In addition, if the small cushion under the seat ring is damaged, there is no need to replace the entire seat ring. You can buy some to replace it, so that the new cushion is installed on the old hole or on the side.
3. If the toilet seat is seriously damaged and affects normal use, you must replace it with a new seat. Before changing the seat, we need to determine the size and model of the toilet, so as not to buy it. So how to change the seat ring after buying it? We first need to find the screw to fix the seat ring, and then use the vibrating hand to unscrew the screw. After removing these decorative hardware accessories, we can remove the old toilet seat. Then clean the lower seat ring area, you can install the new seat ring, using the same method, tighten the screw with a wrench, remember to be in the opposite direction to the screw down. First you need to check the type of your toilet seat. While you want home improvement to replace broken toilet bowl, you should not buy cheap toilet to replace your toilet seat. Wooden toilet seat is not a good option because not holding the nut. Plastic toilet seat is better to have soft close. Otherwise, you can remove the seat for another one.
Toilet seat size
The toilet seat size is different for different toilets, but it is generally 30CM-50CM. For the average fat person, the width of 50cm is no problem! To measure the toilet seat, first measure the distance between the installation hole pitch of the toilet lid and see if it is the standard hole distance, and then measure the distance between the lid and the installation hole screw ,Finally, just measure the length and width of the cover. After recording these three data, you can buy a toilet cover of the appropriate size.
The above is the details of the toilet seat shared by NAVISANI today. If you want to know more, please follow us!
