1. Upper and lower body:
The upper and lower body of the smart toilet can be disassembled for cleaning. As long as the upper machine is gently lifted, it can be easily removed and separated from the water source and the power source.
2. Ontology:
After the seat and cover are separated in the correct way, the contaminated area can be thoroughly cleaned. When cleaning, wipe it with a soft cloth dampened with water. Do not wipe with detergent or medicine to avoid damage to parts. After cleaning, reinstall it.
3. Filter:
When there is dirt blocking the water inlet filter, it may cause insufficient flushing water pressure, so it should be cleaned regularly.
Cleaning steps: 1. Close the inlet valve; 2. Unscrew the water filter net with a special tool; 3. Clean the dirt with a toothbrush or a small brush.
4. Spout:
Press the “nozzle cleaning” button, there is water overflow around the nozzle for nozzle cleaning; use the hand to pull out the nozzle and hold it tightly to clean the nozzle and the tube head; clean it with a soft cloth and water; finally press the stop button , stop spraying water.
5. Clean the deodorizing box and deodorizing suction port:
If there is still a bad smell, please replace the deodorant; when the deodorizing box and the deodorizing suction port are dusty or other attachments, the amount of air inhaled will be reduced, and the dust can be cleaned with a toothbrush or a small brush.
In the winter, to prevent damage to the smart toilet due to icing, please drain the remaining water when not in use. When not used for a long time, you should also let go of the remaining water.
The remaining water is exhausted:
1 Close the inlet valve.
2 Remove the drain bolt after loosening.
3 Re-tighten the drain bolt after draining the remaining water.
